Operation and use of blister packaging machine | blister packaging machine cost

Operation and use of blister packaging machine | blister packaging machine cost

May 18, 2021

Blister packaging machine is a machine in which a transparent plastic film or sheet is formed into a blister, and the product is sealed between the blister and the bottom plate by heat sealing, bonding and other methods. The aluminum plastic machine can pack tablets, milk tablets and other tablets, as well as capsules, candies, electronic cigarettes, disposable syringes and special-shaped objects, perfumes, ketchup, soft capsules, candies, big honey pills, injections, vials, etc. The size of the material. It is a multi-purpose model of aluminum-plastic/paper-plastic, aluminum-aluminum, with fully automatic forming, feeding, sealing and servo traction functions. It meets GMP production requirements. It is an ideal product for medium and large-scale production of pharmaceuticals, health products, chemicals, electronics, food, etc. . Innovated the mechanical molding function. The positive pressure air molding combined with the mechanical punch molding effectively solves the problem of difficult molding of large-sized and large-depth materials such as large-density pills and disposable syringes.
 
Operation and use of blister packaging machine
blister packaging machine cost

The operation and use of blister packing machine:
1. Prepare medicines and packaging materials, and replace the batch number template.
2. Install PVC and aluminum foil, check the cooling water, and clean the equipment carefully.
3. Turn on the power switch and connect the compressed air.
4. Press the heating button and adjust the heating and heat sealing temperature control tables to the appropriate temperature respectively.
5. Pull the rigid PVC sheet under the punching knife through the channel, and pull the aluminum foil under the heat sealing plate.
6. When the heating plate and the heat sealing plate rise to the appropriate temperature, adjust the cooling temperature gauge to the appropriate temperature.
7. When the medicines are all over the entire feeding track, press the green button of the motor and run the empty car. After the blowing, heat sealing and punching meet the requirements, press the tablet bucket vibration button and the planetary cloth switch.
8. When adjusting the blanking, make the blanking meet the requirements and carry out normal packaging.
9. After packaging, shut down in the following order: press the shutdown button of the tablet hopper; press the red button of the motor; stop the main engine; turn off the main power switch; close the air inlet valve; close the water inlet valve. Then clean up the machine and the site, and maintain the packaging equipment.